There is an all-weather cover for your 2015 Rockwood HW277 pop-up camper, and you are correct that their length includes the trailer tongue, so what you'd do is take off three feet from the "official" measurement, which is in line with what you got with your 16 foot measurement. It will be just slightly over 16 feet long, so the best option is a cover for 16'1" - 18' pop-ups:
- Camco UltraGuard Pop-Up Camper Cover # CAM45765
The # CAM45765 cover is also 87 inches wide which is perfect... view full answer...
From what I was able to find with some research it does look like most 2015 Rockwood A122 Pop-up campers had Dexter #9 Torsion axles, but I was not able to verify that with the number you provided. Assuming that your trailer does have the #9 Torsion axle then the # K71-723-01 would be the correct lift kit and the only one available for your trailer. This kit gives you 2-5/8" of additional ground clearance.
If you can provide a photo of the axle spec sticker where you found the serial... view full answer...
For your Forest River Rockwood A212HW, we have the Classic Accessories PolyPro III Deluxe RV Cover # CA80043.
The Classic Accessories PolyPro III Deluxe RV Cover # CA80043 fits pop-up campers that are between 18' - 20' long (this length does not include the trailer tongue, which does not get covered). You then have a PolyPro fabric cover to protect your camper from the elements such as rain, snow and minor sun light. view full answer...
Thank you for the photos they were very helpful and I can tell you that based on those you can absolutely use the Torflex Lift Kit # K71-707-01.
This will work on your #10 Torflex axle without any problem; it would only be an issue if you had high-profile brackets, which your axle does not have so you're set.
I have added a link below to the instructions for you to check out as well if you'd like of the Torflex Lift Kit # K71-707-01. view full answer...
Go To Results